- The traditional manual panel allows full control and mode selection together with a feedback of controller status - A state of the art, powerful, modern processor card running Linux is used for all the control and supervisory functions - The Optima software architecture fully supports the telent MOVA (Version 7) and remote monitoring functions as integral software applications.

An independent processor guarantees that no hazardous situations occur. This independently monitors: - All aspects (including green/green) for conflicts - All signal sequences and appearances - Any flashing operation - Minimum and maximum cycle times where required - Minimum and maximum supply voltage and mains frequency for safe operation - Inter-green timings

- Up to 4 streams of Integral Mova 7 - All modes are available FT, VA, Manual, CLF and UTC - SCOOT and MOVA are available if existing detector loops are readily available to be transferred in to the ITC controller - Optional Remote Monitoring - Optional CCTV - Lamp monitoring of all phases and colours - Integral LRT Mode - Expandable to 32 phases - Expandable digital I/O to 224 inputs/outputs - Expandable to 64 loop inputs - Fully compliant with TR2500 including appendices - Available in large case (19” rack), small case (11” rack) - Dedicated Windows based Simulator software - Dedicated Windows based Configurator software - Integral UG405 Features - Utilises the controller I/O to interface to additional equipment such as external controllers or detector packs. - UTMC compliant (Full UTMC Type 2 MIB), using SNMP over UDP/IP to send and receive traffic control data. - Supports sending reply data both by polling of variables and by reply by exception. Supports both “do now” control and pre-programming of stage demands up to 22 hours into the future. - Ability to control eight traffic signal sites/streams, with each site addressed differently in the UTMC OID. - Supports NTP for maintaining synchronisation of the internal clock with a central time server. - Application log, logging events that will affect traffic signal control such as loss of communications.

- The traditional manual panel allows full control and mode selection together with a feedback of controller status - A state of the art, powerful, modern processor card running Linux is used for all the control and supervisory functions - The Optima software architecture fully supports the telent MOVA (Version 7) and remote monitoring functions as integral software applications.

An independent processor guarantees that no hazardous situations occur. This independently monitors: - All aspects (including green/green) for conflicts - All signal sequences and appearances - Any flashing operation - Minimum and maximum cycle times where required - Minimum and maximum supply voltage and mains frequency for safe operation - Inter-green timings

- Up to 4 streams of Integral Mova 7 - All modes are available FT, VA, Manual, CLF and UTC - SCOOT and MOVA are available if existing detector loops are readily available to be transferred in to the ITC controller - Optional Remote Monitoring - Optional CCTV - Lamp monitoring of all phases and colours - Integral LRT Mode - Expandable to 32 phases - Expandable digital I/O to 224 inputs/outputs - Expandable to 64 loop inputs - Fully compliant with TR2500 including appendices - Available in large case (19” rack), small case (11” rack) - Dedicated Windows based Simulator software - Dedicated Windows based Configurator software - Integral UG405 Features - Utilises the controller I/O to interface to additional equipment such as external controllers or detector packs. - UTMC compliant (Full UTMC Type 2 MIB), using SNMP over UDP/IP to send and receive traffic control data. - Supports sending reply data both by polling of variables and by reply by exception. Supports both “do now” control and pre-programming of stage demands up to 22 hours into the future. - Ability to control eight traffic signal sites/streams, with each site addressed differently in the UTMC OID. - Supports NTP for maintaining synchronisation of the internal clock with a central time server. - Application log, logging events that will affect traffic signal control such as loss of communications.

- The traditional manual panel allows full control and mode selection together with a feedback of controller status - A state of the art, powerful, modern processor card running Linux is used for all the control and supervisory functions - The Optima software architecture fully supports the telent MOVA (Version 7) and remote monitoring functions as integral software applications.

An independent processor guarantees that no hazardous situations occur. This independently monitors: - All aspects (including green/green) for conflicts - All signal sequences and appearances - Any flashing operation - Minimum and maximum cycle times where required - Minimum and maximum supply voltage and mains frequency for safe operation - Inter-green timings

- Up to 4 streams of Integral Mova 7 - All modes are available FT, VA, Manual, CLF and UTC - SCOOT and MOVA are available if existing detector loops are readily available to be transferred in to the ITC controller - Optional Remote Monitoring - Optional CCTV - Lamp monitoring of all phases and colours - Integral LRT Mode - Expandable to 32 phases - Expandable digital I/O to 224 inputs/outputs - Expandable to 64 loop inputs - Fully compliant with TR2500 including appendices - Available in large case (19” rack), small case (11” rack) - Dedicated Windows based Simulator software - Dedicated Windows based Configurator software - Integral UG405 Features - Utilises the controller I/O to interface to additional equipment such as external controllers or detector packs. - UTMC compliant (Full UTMC Type 2 MIB), using SNMP over UDP/IP to send and receive traffic control data. - Supports sending reply data both by polling of variables and by reply by exception. Supports both “do now” control and pre-programming of stage demands up to 22 hours into the future. - Ability to control eight traffic signal sites/streams, with each site addressed differently in the UTMC OID. - Supports NTP for maintaining synchronisation of the internal clock with a central time server. - Application log, logging events that will affect traffic signal control such as loss of communications.